A mainstream chasing rifle scope throughout the years has been Burris’ Fullfield II arrangement of rifle scopes. For 2011, Burris, situated in Greeley Colorado, has made noteworthy moves up to the Fullfield II scope line. This audit will investigate the new E1 in a 3x-9x-40mm degree and contrast it with the standard Fullfield II.
As of now Burris is offering the new E1 arrangement in four force mixes: 2x-7x-35mm, 3x-9x-40mm, 3x-9x-50mm, and 4.5x-14x-42mm. This spreads almost the entirety of the force varieties accessible in the standard Fullfield II with the exception of it forgets about the 6.5x-20x-50mm.
The E1 is named after the new “Upgraded” Ballistic Plex reticle. The first Ballistic Plex offered slug drop remuneration for an assortment of cartridges and the new E1 offers the equivalent ballistic fit, yet improves it with 10 MPH crosswind specks on either side of every one of the ballistic cross lids. On the off chance that you effectively own a Ballistic Plex reticle, you will discover the E1 coordinates indistinguishably with your present arrangement, and just gives a cross breeze check. Every crosswind spot is ¼ of a MOA or ¼ of an inch at 100 yards, which can be utilized to decide separation to an object of a known size.
The new E1 additionally sports an improved turret framework. Burris expanded the turret top spread size and knurled them with huge forests to make it simple to get the turret covers on and off. The turret itself is additionally bigger with an improved grasp. Like the standard Fullfield II, the snap alterations are still ¼ inch at 100 yards or ¼ MOA per click. The new turrets have 68 ticks in a single upset of the turret which means 17 crawls of development at 100 yards.
Specifications of Burris Fullfield E1 Rifle Scope
|Magnification||3 to 9x|
|Objective Lens Diameter||50 mm|
|Field of View||3x: 30′ @ 100 yd / 10 m @ 100 m
9x: 11′ @ 100 yd / 3.7 m @ 100 m
|Exit Pupil Diameter||3x: 17 mm
9x: 5.6 mm
|Eye Relief||3.1 to 3.8″ / 79 to 97 mm|
The last improvement to the Fullfield II is moving the amplification change out of the eye piece and including it as a different force alteration ring that pivots openly from the body of the extension and the eye piece. This plan is increasingly basic in a ton of extensions available and keeping in mind that generally it is a minor issue, those that utilization an eye piece scope top spread will promptly see the advantage of the force change ring. When utilizing an extension top spread on a standard Fullfield II, altering the amplification would cause the degree top spread to pivot, maybe twisted with the brisk discharge tabs on the spread.
The optics of the E1 are equivalent to the standard Fullfield II which are known for their light transmission, brilliance, and lucidity. The new E1 in 3x-9x-40mm will have a road cost of about $200, which is roughly $20 more than the standard Fullfield II in a similar force and target size.
Features of Burris Fullfield E1 Rifle Scope
|Impact Point Correction||1/4 MOA per Click|
|Windage Adjustment||50 MOA|
|Elevation Adjustment||50 MOA|
|Parallax Correction||Yes, 100 yd / 91.4 m|
We just have a couple of minor reactions of the extension. To begin with, our audit model did exclude a sheet clarifying what the dabs spoke to as far as crosswind. Anyway this data could be immediately found on Burris’ site. The other issue is that the new turret framework doesn’t give off an impression of being effectively removable to re-zero the turret in the wake of locating in. This isn’t a work of art however considering the expense of the extension and the way that a great many people won’t re-zeo their turrets subsequent to locating in any case.
The new Fullfield E1 is a perceptible improvement over the standard model. The new turret framework is snappy and simple to utilize, the reticle is improved, and the new force ring makes it a decent incentive at the current asking cost.